Deployment Guide

File Size: 3795 bytes
Transfer Rate: 8 kbps
3. Verify that the license is present in the home directory.
OS10# dir home
Directory contents for folder: home
Date (modified) Size (bytes) Name
--------------------- ------------ -----------------------
2019-02-15T00:47:25Z 3795 7B900Q2-NOSEnterprise-License.XML
4. Run the license install command and specify the path to the home directory location where the license was downloaded in step 1.
OS10# license install localfs://home/admin/7B900Q2-NOSEnterprise-License.XML
[ 5784.994389] EXT4-fs error (device dm-0): ext4_has_uninit_itable:3039: comm
CPS_API_instanc: Inode table for bg 0 marked as needing zeroing
License installation success.
Install license using management VRF
OS10(config)# ip vrf management
OS10(conf-vrf)# interface management
OS10(conf-vrf)# exit
OS10(config)# ip sftp vrf management
OS10(config)# exit
OS10# license install sftp://user:userpwd@10.1.1.10/CFNNX42-NOSEnterprise-License.xml
License installation success.
Verify license installation
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : DELL
Product Name : S4128F-ON
Hardware Version : A01
Platform Name : x86_64-dellemc_s4128_c2538-r0
PPID : CN0X4XRXCES007980029
Service Tag : 9CLSG02
Product Base :
Product Part Number:
License Details
----------------
Software : OS10-Enterprise
Version : 10.4.3.0
License Type : PERPETUAL
License Duration : Unlimited
License Status : Active
License location : /mnt/license/9CLSG02.lic
---------------------------------------------------------
Troubleshoot license installation failure
An error message displays if the installation fails.
License installation failed
1. Verify the installation path to the local or remote license location.
2. Check the log on the remote server to find out why the FTP or TFTP file transfer failed.
3. Ping the remote server from the switch — use the ping and traceroute commands to test network connectivity. If the ping
command fails:
• If the remote server is reachable through the Management route, check if the Management route is configured correctly.
• If the remote server is reachable through a front-panel port, check if the static or dynamic route is present.
4. Install the server with the license file on the same subnet as the switch.
5. Check if the server is up and running.
ON-Series switch installation
13