Users Guide

● Hardware logs—Yes

● Firmware details—Yes

● Network details—Yes

● Storage—Yes

● Hardware inventory—Yes

● Health status—Yes

● Warranty information—Yes

● SupportAssist collection—Yes

● Location—Yes

Devices—YX4X servers added by using Quick Sync 2

● Hardware logs—System event and Lifecycle logs

● Firmware details—Yes

● Network details—Yes

● Storage—Not applicable

● Hardware inventory—Yes

● Health status—Yes

● Warranty information—Yes

● SupportAssist collection—Yes

● Location—Yes

Add servers to be monitored by OMM without a Dell

EMC console

Before adding servers to OMM, ensure that you have:

● iDRAC7 or later with Enterprise or Express edition license. Or, iDRAC9 with Datacenter license.

● VPN or internal WiFi access to the iDRAC network from your mobile phone.

You can add servers to OMM by using a network or Quick Sync 2.

NOTE: To refresh the information displayed on any page in OMM, tap and swipe downwards.

Add servers to OMM without a Dell EMC console by using a

network

If the username and password are the same, you can add multiple servers. Ensure to add all the servers in the range by using a +

or * for the last octet. For example, 192.168.0. Or, enter the start and end IP numbers of the server in the last octet and use a

dash to separate it. For example, 192.168.0.50-100.

1. View the Add page on page 15.

2. Add a device by using a network on page 23.

Add a device by using a network

1. Tap Server or MX Chassis > NEXT > Connect via Network > NEXT.

2. Enter the hostname or IP, username, password, and domain of the device.

3. To save data you entered, tap Submit.

The server or chassis is added to OMM and the updated server or chassis dashboard is displayed.

Individually manage PowerEdge servers by using OMM