Users Guide

Figure 49. Create chassis group
6. Select the appropriate onboarding permissions, and tap Next.
7. Select the configuration settings that you want to propagate to the group members, and tap Next.
The chassis automatically detects all the chassis that are physically wired to the lead chassis, and you can choose any chassis to add to
the group.
8. Tap Done.
The chassis group is created.
Deleting a group
You can delete an existing group. The chassis in the group becomes a stand-alone chassis.
Prerequisites to delete a group:
• Ensure that the chassis is accessible over the network.
• Ensure that the chassis is a lead chassis.
• Ensure that the chassis is authenticated with proper permissions.
To delete a chassis group:
1. In the Inventory section of OpenManage Mobile home page, perform one of the following:
• Tap Chassis.
• Tap View All.
Tap the appropriate chassis group that you want to delete.
The Chassis Dashboard of the group is displayed.
2. Tap Chassis.
The Chassis Group page is displayed.
3. Select the lead chassis from the list.
The Chassis Dashboard of the lead chassis is displayed.
4.
Tap .
5. Tap Configure.
The Configuration page is displayed.
6. Tap Chassis Group Configuration.
7. Tap Next.
8. Tap Delete Chassis Group, and tap Next.
9. The delete confirmation message is displayed. Tap Done.
The chassis group is deleted.
56
Managing an MX7000 chassis