Users Guide

Managing an MX7000 chassis

This section provides information you require to add, edit, or delete an MX7000 chassis in OpenManage Mobile.

A chassis is a combination of sleds, storage enclosures, fan slots and power units. A chassis allows you to view the details in a chassis

enclosure. You can view a storage enclosure you can blink and view the enclosure detail and basic sled configuration

Topics:

• Adding an MX7000 Chassis using Quick Sync 2

• Viewing an MX7000 Chassis dashboard

• Editing connection details of an MX7000 chassis

• Deleting an MX7000 chassis

• Viewing additional MX7000 chassis options

• Configure an MX7000 chassis

• Manage IOMs by using OMM

• Chassis group configuration

Adding an MX7000 Chassis using Quick Sync 2

Ensure that a quick sync module is installed in the chassis or the chassis is accessible over the network.

NOTE:

You cannot add a chassis by using cellular network.

To add an MX7000 chassis:

1. Start OpenManage Mobile.

2. If applicable, type the OMM password and tap Login.

The OMM home page is displayed.

3. Perform one of the following:

• On the OMM home page, tap Connect

• On the OMM home page, tap View All, and tap in the upper right corner.

4. Tap MX Chassis, and tap Next.

Figure 42. Adding an MX7000 Chassis using Quick Sync 2

NOTE:

You are prompted to enable access to the location and camera when you start OpenManage Mobile for the

first time after an installation or upgrade.

48 Managing an MX7000 chassis