Users Guide

• Tap View All, and tap the appropriate iDRAC.
The iDRAC dashboard is displayed.
2. Tap .
3. Tap Configure.
4. Tap Configuration.
5. Enable Auto Config by using the toggle switch.
The Select DHCP Provisioning dialog box is displayed.
6. Tap DHCP Provisioning, and tap one of the following options:
• Enable Once
• Enable Once After Reset
• Disabled
7. Tap Next.
The configuration is saved and the status can be viewed in the Task Manager.
Template deploy
You can perform the initial server deployment using OpenManage Mobile. You can edit and save the server configurations mentioned
below:
• IPV4 Settings
• IPV6 Settings
• NIC Configuration
• BIOS Configuration
• Root Configuration
• Location Information
• First Boot device
Figure 40. Configure Server
Creating a Deployment template
NOTE:
The template deploy option is available only for YX4X servers. For more information about the naming
conventions of servers, see Identifying the generation of your Dell EMC PowerEdge server.
To create a deployment template in OMM:
1.
Tap from the OMM home page.
Managing iDRAC
45