Users Guide

4. Tap one of the following commands:
• System Information
• Hardware Inventory
• License Information
• Software Inventory
• Job Information
• Current NIC config
• Current NIC Statistics
• LC Log
• Custom Command—You can manually type a RACADM command to perform any server operation.
The available report is displayed.
Figure 36. RACADM Commands
Device inventory
You can view the following device inventory information of a server (iDRAC connection), an OpenManage Essentials, or an OpenManage
Enterprise—managed device.
Table 1. Device inventory
Information Description
Power State Displays the power status of the device
IP Address If this server was added individually, this value is the IP address that is used to connect to the iDRAC. If this device
is discovered through OpenManage Essentials or OpenManage Enterprise, there could be multiple IP addresses
that are associated with the device.
Service Tag The service tag associated with the device
Device Type Displays the type of device
Device Model The device model
CPUs The processor model, number of processors, and number of cores
Memory Total system memory in the server
Operating System The name of the operating system. This may require OpenManage Server Administrator (OMSA) to be installed on
the system.
Host name The host name of the server
NOTE: Not all details are available for all managed devices.
Managing iDRAC 41