Users Guide

Figure 43. Adding an MX7000 Chassis using Quick Sync 2
NOTE: You are prompted to enable access to the location and camera when you start OpenManage Mobile for the rst
time after an installation or upgrade.
5 Tap Add via Quick Sync 2, and tap Next.
A video on how to enable the bluetooth connection is displayed.
6 Tap Next.
7 Select the chassis that you want to add, and tap Next. You can use the Blink LED option to identify the chassis.
8 You can authenticate the chassis in one of the following ways:
QR Scan:
a On the credentials page, Tap SCAN QR CODE.
The camera access permission pop-up message is displayed.
b The credential is automatically populated. Tap Add Device.
Position the camera to scan the QR code displayed on the LCD panel of the chassis.
NOTE
: To enter the credentials manually or by using QR scan, ensure that the Read authentication is
Enabled on the server.
Manual credentials:
a Enter the credentials to add the chassis.
b Enter the credentials.
c Tap Submit.
Managing an MX7000 chassis
53