Users Guide

4 Tap iDRAC Conguration.
5 Enable Auto Cong using the toggle switch.
The Select DHCP Provisioning dialog box is displayed.
6 Tap DHCP Provisioning, and tap one of the following options:
• Enable Once
• Enable Once After Reset
• Disabled
7 Tap Next.
The conguration is saved and the status can be viewed in the Task Manager.
Template deploy
You can perform the initial server deployment using OpenManage Mobile. You can edit and save the server congurations mentioned
below:
• IPV4 Settings
• IPV6 Settings
• NIC Conguration
• BIOS Conguration
• Root Conguration
• Location Information
• First Boot device
Figure 39. Congure Server
Creating a Deployment template
NOTE
: The Template deploy option is available only for 14G servers.
Managing iDRAC 49