Users Guide

Figure 43. Adding an MX7000 Chassis

NOTE: You will be prompted to allow access to the location and camera when you start OpenManage Mobile for the rst

time after an installation or upgrade.

5 Tap the appropriate chassis.

6 You can authenticate the chassis in one of the following ways:

QR Scan:

a On the credentials page, Tap SCAN.

The camera access permission pop up message is displayed.

b The credential is auto populated. Tap Add Device.

Position the camera to scan the QR code displayed on the LCD panel of the chassis.

NOTE

: To enter the credentials manually or by using QR scan, ensure that the Read authentication is Enabled on the

server.

Manual credentials:

a Enter the credentials to add the chassis.

b Type the credentials.

Managing an MX7000 chassis