Users Guide

iDRAC conguration using WS-MAN protocol
iDRAC conguration using WS-MAN portal
To congure the iDRAC conguration using WS-MAN portal:
1 From the Home screen, tap the appropriate server.
2 Tap .
3 Tap Congure.
4 Tap iDRAC Conguration.
5 Enable Auto Cong using the toggle switch.
The Select DHCP Provisioning dialog box is displayed.
6 Tap one of the following options to congure the DHCP Provisioning:
• Enable Once
• Enable Once After Reset
• Disabled
7 Tap Next.
The conguration is saved and the status can be viewed in the Task Manager.
Template deploy
You can perform the initial server deployment using OpenManage Mobile. You can edit and save the server congurations mentioned
below:
• IPV4 Settings
• IPV6 Settings
• NIC Conguration
• BIOS Conguration
• Root Conguration
• Location Information
• First Boot device
Managing iDRAC
49