Users Guide

6 Type Username and Password of the iDRAC in the Task Credentials section.

7 Tap Sync Now to sync.

8 Turn on the iDRAC Quick Sync Bezel.

9 Place your mobile device in contact with the iDRAC Quick Sync Bezel activation switch on your server and hold your mobile for at

least 3 seconds.

NOTE: Conguration changes may take up to a minute to apply.

Activating or deactivating the system ID LED

OpenManage Mobile allows you to identify a server by activating or deactivating the system ID LED.

To activate or deactivate the system ID LED:

1 Tap the iDRAC of the server you want to activate or deactivate the system ID LED.

2 Tap .

3 Tap Blink LED.

The Select Blink LED Timeout or Turn O options are displayed.

4 Tap one of the following options to activate or deactivate the System ID LED:

• 4 Minutes

• Blink LED until turned o

• Blink o

Figure 38. Blink LED options

AutoConguration using XML conguration le

You can utilize the XML conguration le in OpenManage Mobile. The XML le can be accessed from the shared network folder. The XML

les are congured uniquely using the DHCP sever. The available DHCP Provisioning options are:

• Enable once

• Enable once after reset

• Enable always

NOTE

: This option is available only for servers with iDRAC Enterprise license.

48 Managing iDRAC