Users Guide

Changing the conguration of an iDRAC

This feature is applicable only for 13G servers with the iDRAC Quick Sync Bezel.

NOTE: Reading iDRAC information through Quick Sync is not password protected. Making conguration changes through iDRAC

Quick Sync requires iDRAC credentials with appropriate permission.

To change the conguration of an iDRAC:

1 On the OpenManage Mobile home screen, tap the appropriate iDRAC to change the conguration.

2 Tap and then tap Congure.

The iDRAC Conguration screen is displayed.

Figure 36. iDRAC conguration

3 Tap iDRAC Conguration and then tap Manual Conguration.

The Manual Conguration screen is displayed.

Figure 37. iDRAC conguration

4 Tap IPv4 Settings to change the IPv4 settings, IPv6 Settings to change the IPv6 settings, Root Credentials to change the root

credentials, First Boot Device to change the boot settings, tap System Reset to change the power options.

5 Make changes in the conguration and tap Apply.

Managing iDRAC