Users Guide

3 Tap Run RACADM command .
The RACADM commands screen is displayed.
4 Tap one of the following commands mentioned below:
• System Information
• Hardware Inventory
• License Information
• Software Inventory
• Job Information
• Custom Command - You can manually type a RACADM command to perform any server operation.
The available report is displayed.
Figure 35. RACADM Commands
Device inventory
You can view the following device inventory information of a server (iDRAC connection), an OpenManage Essentials, or an OpenManage
Enterprise— managed device.
Table 1. Device inventory
Information Description
Power State Displays the power status of the device
IP Address If this server was added individually, this value is the IP address used to connect to the iDRAC. If this device is
discovered through OpenManage Essentials or OpenManage Enterprise, there could be multiple IP addresses
associated with the device
Service Tag The service tag associated with the device
Device Type Displays the type of device
Device Model The device model
CPUs The processor model, number of processors, and number of cores
Managing iDRAC 45