Users Guide

Tap Edit Connection.
The Edit Connection screen is displayed.
2 Edit the Hostname, Username, Password, and Domain (if applicable).
3 Tap Save to save the connection details.
4 Tap OK.
The iDRAC Details screen is displayed.
Deleting an iDRAC
To delete an iDRAC from OpenManage Mobile:
1 On the OpenManage Mobile home screen, perform one of the following steps:
Select the device you want to remove, and tap .
NOTE: If you want to remove multiple iDRACs, select each iDRAC that you want to remove.
Press and hold the iDRAC on the OpenManage Mobile home screen.
1 Tap Edit Connection.
2 Tap Delete iDRAC.
2 The Delete Conrmation message is displayed.
3 Tap Yes.
The iDRAC is deleted from OpenManage Mobile.
RACADM Commands
RACADM Commands
NOTE
: Only users with iDRAC congure privileges are allowed to modify the settings.
RACADM Commands allows you to run a set of predened commands . The generic GET and SET sub-commands are used to congure
and retrieve the objects. The available RACADM commands are as mentioned below:
System Information
Hardware Inventory
License Information
Software Inventory
Job Information
Custom Command
Performing RACADM Command operations
Performing RACADM Command operations
Ensure the device is connected to the appropriate server and network.
NOTE
: The RACADM commands can also be performed via WSMAN or Quick Sync over WiFI.
To perform RACADM command operations:
1 From the Home screen, tap the appropriate server.
2 Tap .
44
Managing iDRAC