Users Guide

Figure 25. Adding multiple iDRACs

The process of adding multiple iDRACs is initiated. You can check the status of the process in the task manager.

Adding an iDRAC using iDRAC Quick Sync Read

The iDRAC Quick Sync Read feature enables your mobile device to act as a proximity reader to read data from your server when the device

is in contact with the iDRAC Quick Sync Bezel.

NOTE

: For the latest bug xes, we recommend upgrading your iDRAC rmware. For more information about upgrading the

iDRAC rmware see,

iDRAC User’s Guide

NOTE: This feature is applicable only for Dell’s 13th generation of PowerEdge servers with the iDRAC Quick Sync Bezel.

NOTE: Reading iDRAC information via Quick Sync is not password protected. Making conguration changes via iDRAC Quick

Sync requires iDRAC credentials with appropriate permission.

To add an iDRAC using iDRAC Quick Sync Read:

1 Start OpenManage Mobile.

2 If applicable, type the OpenManage Mobile Password and tap Login.

The OpenManage Mobile homescreen is displayed.

3 Tap the symbol.

The Add screen is displayed.

4 Select iDRAC Quick Sync Read.

5 Tap Launch iDRAC Quick Sync.

Managing iDRAC