Users Guide

1. From the Home screen, tap the appropriate server.

2. Tap Options.

3. Tap Run RACADM command.

The RACADM commands screen is displayed.

4. Tap one of the following commands mentioned below:

• System Information

• Hardware Inventory

• License Information

• Software Inventory

• Job Information

• Custom Command - You can manually type a RACADM command to perform any server operation.

The available report is displayed.

Figure 16. RACADM Commands

AutoConfiguration using XML configuration file

You can utilize the XML configuration file in OpenManage Mobile. The XML file can be accessed from the shared network folder. The XML

files are configured uniquely using the DHCP sever. The available DHCP Provisioning options are:

• Enable once

• Enable once after reset

• Enable always

NOTE: This option is available only for servers with iDRAC Enterprise license.

iDRAC configuration using WS-MAN portal

To configure the iDRAC configuration using WS-MAN portal:

1. From the Home screen, tap the appropriate server.

2. Tap Options.

3. Tap Configure.

4. Enable Auto Config using the toggle switch.

The Select DHCP Provisioning dialog box is displayed.

5. Tap one of the following options to configure the DHCP Provisioning:

Managing OpenManage Essentials console