Users Guide

Figure 29. Blink LED options

AutoConfiguration using XML configuration file

You can utilize the XML configuration file in OpenManage Mobile. The XML file can be accessed from the shared network folder. The XML

files are configured uniquely using the DHCP sever. The available DHCP Provisioning options are:

• Enable once

• Enable once after reset

• Enable always

NOTE: This option is available only for servers with iDRAC Enterprise license.

iDRAC configuration using WS-MAN portal

To configure the iDRAC configuration using WS-MAN portal:

1. From the Home screen, tap the appropriate server.

2. Tap Options.

3. Tap Configure.

4. Tap iDRAC Configuration.

5. Enable Auto Config using the toggle switch.

The Select DHCP Provisioning dialog box is displayed.

6. Tap one of the following options to configure the DHCP Provisioning:

• Enable Once

• Enable Once After Reset

• Disabled

7. Tap Next.

The configuration is saved and the status can be viewed in the Task Manager.

Template deploy

You can perform the initial server deployment using OpenManage Mobile. You can edit and save the server configurations mentioned

below:

• IPV4 Settings

• IPV6 Settings

• NIC Configuration

Managing iDRAC