White Papers

Technical support and resources
19 Managing Modular Infrastructure by using OpenManage Essentials (OME)
Modifying Repurpose and Bare Metal Device Group
6.3 Deploy the template
This section describes the procedure for deploying a Chassis Infrastructure template to chassis (CMC device
and the IOAs present on the chassis) or an MX Chassis template to an MX Chassis.
6.3.1 Deploy the template to Chassis or MX Chassis
1. Navigate to the Deployment tab.
2. In the left pane, click Deploy Template under Common Tasks.
3. Type a unique name for the task. The name is optional, since a default name is supplied, but it is a
generic name, and the same default name is always supplied. Selecting a name that is relevant to
what is being deployed is suggested.
4. Select Deploy Template, and then click Next.
5. Select the template to be deployed on the target CMC device of the target chassis or on the target
MX Chassis device and click Next.
6. Select the target CMC devices of the chassis or target MX Chassis and click Next.
7. Type the device specific attributes for each target CMC devices and the IOA devices of the target
chassis.