Users Guide

Field Description
Servers
Select to include Dell servers.
Storage Devices
Select to include storage devices.
Unknown
Select to include unknown devices.
VMware ESX Servers
Select to include VMware ESX servers.
VxFlex Ready Nodes
Select to include VxFlex Ready Nodes and ScaleIO Ready
Nodes.
Date and Time Range
Table 205. Date and Time Range
Field Description
Limit Date Range Species a specic date range to match alerts.
Limit Time Range Species a specic time range to match alerts.
Limit Days Select to specify the days on which to enable the alert
association. If you do not enable this option, the association is
applied continuously within the time frame that you specify.
Each of these elds are exclusive of the other, so selecting date
8/1/11- 10/1/11, 1am to 4 AM, Friday, will match alerts on only
Fridays from 1-4 AM only within that date range.
NOTE: It is possible to input a date range and days
selection that will never produce a result. For example,
9/1/11 and Monday — since 9/1/11 was a Thursday, it
will never match.
If none of these are checked, it means that the alert selection
will have no date/time lter.
Alert Action — Duplicate Alert Correlation
Table 206. Duplicate Alert Correlation
Field Description
Yes. Only duplicate alerts that match this lter will be
executed.
Enabling this option deletes duplicate alerts (with the same ID
and from the same device) received within the specied
interval. Use this option to prevent a device from sending an
overabundance of alerts to the console.
Ignore duplicate alerts that are received during the interval (1
second - 24 hours).
Select this option and set the required time interval to ignore
duplicate alerts. This option can be used to ignore alerts for
maximum of 24 hours.
No Select this option if you do not want duplicate alerts to run at
increased duration.
Summary — Alert Action Details
View and edit selections.
The alert action details screen is shown on the nal page of the alert action wizards or when clicking any alert action in the tree.
The alert action will have a subset of the following properties, depending on alert action type and lter criteria chosen (this probably
should be a table):
273