Users Guide

changes are made). Each device veries the validity of the settings in the conguration and identies any problems. The verication
can identify problems with attribute values themselves, or problems based on inter-attribute dependencies. For example, creating a
device conguration template from a PowerEdge R720 server and deploying the template on a PowerEdge R620 server would result
in errors. Running the preview allows you to identify the attributes that will not be deployed successfully. After identifying those
attributes, if required, you can clear those attributes from the template and then deploy the template.
NOTE: The preview activity identies many problems; however, some problems cannot be determined before the actual
deployment.
Click the Preview button to validate the attributes of the device conguration template with the selected device.
Related link
Deploy Template Wizard
Summary
The Summary page displays the options you have selected for the deployment task.
The elds displayed in the Summary page are described in the following table.
Table 110. Summary
Field Description
Task Name Displays the task name.
Deploy Template Displays if the task will deploy a conguration template.
Boot to Network ISO Displays if the task will boot to a network ISO image.
Deploy Target Displays the target devices that you have selected.
Selected Template Displays the conguration template selected for deployment.
Device Specic Attributes Displays if the device-specic attributes are set.
ISO Filename Displays the name of the ISO le.
Share IP Displays the IP address of the network share where the ISO le
is available.
Share Name Displays the name of the network share where the ISO le is
available.
Share Username Displays the user name provided to access the network share.
Identity Assignment Displays the type of I/O identity assignment that you have
selected.
Virtual IO Pool Displays the name of the virtual IO pool to which the device
belongs.
Associated Devices Displays the selected target devices.
Congure VLANs on IOA Displays if you have selected to deploy VLAN attributes on the
IOA.
Perform pre-check only Displays if you have selected the Perform pre-check only
option.
Continue on warnings Displays if you have selected the Continue on warnings option.
Schedule Displays the schedule selected for the task.
Related link
Deploy Template Wizard
194