Users Guide

Field Description

Import from le Select to import WWPN identities from a .csv le.

Import Click to open the wizard used to import WWPN identities from

a .csv le.

NOTE: The .csv must include only one address or

identity per line.

View Click to view the WWPN identities in the virtual I/O pool.

NOTE: You can only view WWPN identities that you

have already imported from a .csv le.

Related link

Create Virtual Input-Output Pool Wizard

iSCSI IQN Identities

The iSCSI IQN Identities page allows you to generate or import iSCSI Qualied Name (IQN) identities to the virtual I/O pool. The

IQN identities are required to support boot-from-SAN using the iSCSI protocol.

The elds displayed on the iSCSI IQN Identities page of the Create Virtual I/O Pool Wizard are described in the following table.

Table 79. iSCSI IQN Identities

Field Description

Include IQN Identities in the Pool Select to include IQN identities in the virtual I/O pool.

Specify a prex to allocate from Select to specify a prex for the IQN identities that will be

generated.

NOTE: The typical iSCSI IQN format is:

iqn.date.domainname-in-reverse:storage-identier

. For

example, iqn.

2001-04.com.example:storage.disk2.sys1.xyz.

Import from le Select to import IQN identities from a .csv le.

Import Click to open the wizard used to import IQN identities from

a .csv le.

NOTE: The .csv must include only one address or

identity per line.

View Click to view the IQN identities in the virtual I/O pool.

NOTE: You can only view IQN identities that you have

already imported from a .csv le.