Users Guide

Viewing the VLAN Conguration Inventory
To view the VLAN conguration inventory of a chassis:
1.
Click Manage → Devices.
2. In the device tree, click Modular Systems.
3. Click PowerEdge M1000e or PowerEdge FX2 and then click the chassis CMC node.
4. On the right pane, click the VLAN Conguration tab.
The VLAN conguration inventory is displayed.
NOTE: If you are accessing the VLAN Conguration tab for the rst time, click the refresh icon that is
displayed at the middle of the VLAN Conguration tab to display the conguration inventory.
NOTE: The VLAN conguration inventory that is displayed may not be up-to-date. To view the latest VLAN
conguration inventory, click the refresh icon
that is displayed at the top-right of the VLAN Conguration
tab.
NOTE: VLAN conguration inventory is not displayed if the IOAs are not discovered or congured.
Even though the VLAN conguration inventory is not displayed, OpenManage Essentials displays the IOA Name and
Model information if it is available. Otherwise a status message is displayed, indicating the reason for the non-availability of
the inventory information.
The following table describes the status messages that may be displayed.
Table 43. Viewing the VLAN Conguration Inventory
Status Description
Device not discovered The IOA is not discovered in OpenManage Essentials.
Slot is empty The chassis fabric slot is empty.
Firmware or Mode not supported The operational mode or rmware version of the IOA is not
supported.
Unable to retrieve data OpenManage Essentials is unable to retrieve the VLAN
conguration inventory from the IOA.
Unknown/Error An error occurred or the status is unknown.
Model not supported The IOA model is not supported.
Assigning VLAN IDs
Before you begin, ensure that you have IOA administrator rights.
To apply VLAN assignments:
1. On the VLAN Conguration tab, under Chassis IOA, type the VLAN IDs in the Tagged VLANs and Untagged VLAN columns
for the appropriate ports.
NOTE: The valid range for VLAN IDs are 1 to 4094. Use a comma (,) to separate VLAN IDs and use a hyphen (-) to
specify the ID range.
2. Click Apply.
The VLAN Conguration window displays the IOA ports that you modied.
NOTE: You can also modify the VLAN IDs in the VLAN Conguration window.
109