Release Notes

Issue 20:

Description: When an MX7000 chassis is configured with a non-default web server port, the chassis configuration template

creation and deployment will fail in OpenManage Essentials version 2.5. [142466]

Resolution: Configure the MX7000 chassis with default web server port and create the chassis configuration template and

redeploy the template.

Issue 21:

Description: For 14

generation of PowerEdge servers with iDRAC firmware versions 3.30.30.30 and later, creating server

configuration templates and baselines will fail. [144250]

Resolution: Configure deployment file share for 14

generation of PowerEdge servers with iDRAC firmware versions

3.30.30.30 and later.

Security

To prevent security issues due to cross frame scripting (XFS) in Internet Explorer, you must disable web frames across different

domains:

1. Click Tools > Internet Options.

2. Click Security.

3. Under Select a zone to view or change security settings, select Local intranet.

4. Under Security level for this zone, click Custom level.

5. Under Miscellaneous > Navigate windows and frames across domains, select either Prompt or Disable.

Reports

Issue 1:

Description: In the Agent and Alert Summary report, if the devices are filtered by any Group other than All Devices, the

Agent Summary table does not display the correct information. [49510]

Resolution:

Issue 2:

Description: Device Name is a default field and is present in all reports. [134260]

Issue 3:

Description: The time displayed in the reports generated by Essentials and the Device Summary/Details page are in the time

zone corresponding to the management station. [75603]

Issue 4:

Description: Software Components report does not show entries for ESXi servers.

Issue 5:

Description: To populate Modular enclosure reports, CMC should have firmware version 4.0 and above.

Issue 6:

Description: Windows Server 2008 R2 and Windows 7 will not let you add the Administrators and Users group to the

OmeUsers and OmeAdministrators groups using computer management. If you want to add the Administrators and Users

group use the command prompt or delete the OME groups to have them reset.

Command to list your local groups: net localgroup

Command to add Users to OmeUsers: net localgroup "OmeUsers" Users /add

Command to add Administrators to OmeAdministrators: net localgroup "OmeAdministrators"

Administrators /add

Command line interface

Issue 1: