White Papers

Introduction
18 Manage Firmware and Driver Compliance by using Multiple Baselines in Dell EMC OpenManage Essentials
4 View group-wise compliance of devices to a Catalog
Baseline Association
OpenManage Essentials 2.4 and later versions show information about the catalog baseline(s) associated
with compliant or non-compliant device(s) belonging to custom group(s).
To view the catalog baseline associations, on the System Update portal, switch to Compliant Systems tab or
Non-Compliant Systems tab. Figure 16 shows Non-Complaint Systems Tab selected, device(s) belonging
custom group(s), and associated catalog baseline name(s) to the custom group(s).
Device To Catalog Baseline Association Group-wise
Association of non-compliant device and baseline (group-wise) can also be viewed in the OME device tree.
1. On the OME device tree, click on a custom group.
2. In the right pane, click Non-Compliant Firmware & Drivers.
3. Figure 17 shows the following:
 Custom Group 1 selected in the Device tree.
 In the working pane, on the Non-Compliant Firmware & Drivers tab, the devices belonging to
the groups are listed along with the baseline they are associated with (My Baseline 1).