White Papers

Create templates
27 Server Hardware Provisioning and OS Deployment by using Dell EMC OpenManage Essentials
Follow these steps to enable partitioning and allocate minimum and maximum bandwidth per partition on a
network interface card in the server template:
1. Navigate to the Deployment tab.
2. In the left pane select the template under TemplatesServer Templates.
3. Select Boot and Network Configuration tab in the right side template details.
4. Expand Network Interface Settings.
5. Expand network interface card of your choice.
6. Select the Enable check box.
7. Select Minimum Bandwidth (%) and Maximum Bandwidth (%) for each partition of the port.
8. Click Save to make the changes to the template.
Note—During the deployment of edited templates, target server’s iDRAC might restart multiple times
depending on configuration template settings. For example, enabling partitioning on an un-partitioned network
interface card.
Enable partitioning on a network interface card
To assign tagged VLAN and untagged VLAN on corresponding IOA ports of server’s network interface card:
1. Expand the required NIC.