Users Guide

Template Attributes
The elds displayed on the Template Attributes tab are described in the following table.
Tabla 125. Template Attributes
Field Description
Grouped by Displayed if you choose to display the attributes as groups.
Total Displays the total number of attributes.
Modied Displays the number of attributes that you have modied.
Section Displays the component that the attribute belongs to. For
example, iDRAC, BIOS, NIC, and so on.
Instance Displays the instance of the component that the attribute
belongs to.
Attribute Name Displays the name of the attribute.
Value Displays the value of the attribute.
Dependencies Displays if the attribute is dependent on any other attributes. To
edit a dependent attribute, you must rst set the primary
attribute.
Destructive Displays if deploying the attribute may result in destructive
changes to the device conguration including performance,
connectivity, and ability to boot the device.
Undo Click to undo the changes made to the device conguration
template.
Save Click to save the changes to the device conguration template.
IOA VLAN Attributes
The elds displayed on the IOA VLAN Attributes tab are described in the following table.
Tabla 126. Atributos de VLAN de IOA
Campo Descripción
Atributos de VLAN de IOA para plantilla Muestra el nombre de la plantilla seleccionada.
Total Muestra el número total de atributos.
Modicado Muestra el número de atributos que ha modicado.
Implementar Seleccione para implementar un atributo. Si no hay ningún
atributo seleccionado, el valor de atributo no se implementa en
el dispositivo de destino y se conserva el valor actual en el
dispositivo de destino. Para seleccionar todos los atributos en la
plantilla, seleccione la casilla de vericación en el encabezado de
columna Implementar.
Modicado Muestra si se han modicado los atributos.
NIC Muestra el descriptor del dispositivo completo (FQDD) de la
NIC.
Red Fabric Muestra la red fabric asociada a una ranura especíca del chasis.
Las ranuras se identican mediante una combinación del nombre
del grupo (A, B o C) y el número de ranura (1 o 2).
211