Users Guide

NOTE: Correlation of PowerEdge FC430, FC630, or FC830 sleds under the host chassis is not supported in the following
scenarios:
• The sleds are discovered using WMI protocol (in-band) and do not have OMSA installed.
• The sleds are discovered using IPMI protocol (out-of-band).
• The sleds are running ESXi and either have or do not have OMSA installed.
Supported storage devices, protocols, and features matrix
NOTE: For description of the features listed in the following table, see Legend and Denitions.
Table 13. Supported storage devices, protocols, and features matrix
Protocol / Mechanism Simple Network
Management Protocol
(SNMP)
Symbol EMC NaviSphere CLI
Storage
Devices
Dell EqualLogic Discovery
Classication
Hardware inventory
Monitoring
Traps/alerts
Application launch —
EqualLogic console
NOTE: It is
recommended that
you discover
EqualLogic storage
arrays using the
Group Management
IP or Storage Group
IP only, and not
include any of the
member IPs in the
discovery range
conguration.
Not supported Not supported
Dell EMC
NOTE: Both
SNMP and
Navisphere are
required for
complete
management of
Dell EMC
devices.
Discovery
Classication
Traps/Alerts
Not supported Hardware inventory
Monitoring
Application launch — EMC
Navisphere Manager
PowerVault Traps/Alerts Discovery
Classication
Hardware inventory
Monitoring
Application launch —
Modular Disk Storage
Manager (a)
Not supported
Compellent Discovery Not supported Not supported
56