Users Guide

Viewing Compliant Servers
To view compliant servers:
1. Click Manage → System Update.
2. In System Update, select the Compliant Systems tab.
Viewing Non-Compliant Systems
To view non-compliant systems:
1. Click Manage → System Update.
2. In System Update, select the Non-Compliant Systems tab.
Systems with drivers and rmware versions that are dierent from the catalog are displayed.
Viewing Non-Inventoried Systems
To view non-inventoried systems:
1. Click Manage → System Update.
2. In System Update, select the Non-Inventoried Systems tab.
Systems that are not inventoried are displayed.
NOTE: CMC rmware updates (CMC active controller only) are also displayed in these results.
NOTE: To inventory the non-inventoried servers, you can select the non-inventoried servers and click Inventory. The
method of inventory collection may vary based on the following criteria:
• If the server is discovered through SNMP and has OMSA installed, the default discovery and inventory is initiated.
• If the server is discovered through WMI/SSH and does not have OMSA installed, the Create F/W & Driver Inventory
Task window is displayed.
Viewing Systems With Issues and Resolutions
To view systems with issues and resolutions:
1. Click Manage → System Update.
2. In System Update, select the Issues and Resolutions For Updates tab.
Systems with issues and the resolutions are displayed. For more information, see Issues and Resolutions Use Case Scenarios.
System Update Use Case Scenarios
The following table provides use case scenarios about how system updates occur based on dierent protocols and the update
modes.
NOTE: If the preferred system update method selected in Advanced Settings is In-Band (Operating System) and
OpenManage Server Administrator (OMSA) is installed on the target server, the components are updated using OMSA. If
OMSA is not installed on the target server, the components are updated through the operating system.
Table 212. System Update Use Case Scenarios
Protocol Used for
Server IP
Discovery and
Inventory
Protocol Used for
iDRAC IP
Discovery and
Inventory
Preferred System Update
Mode Selected in
Advanced Settings
Credentials for
System Update
Actual Update Mode
SNMP SNMP In-Band (Operating
System)
Server All components are updated using
OpenManage Server Administrator.
276