Users Guide
• Agent IP Address
• Engine ID
• Username
c. Select the Authentication Protocol from the list.
NOTE: SHA1 is the authentication protocol selected by default.
d. Enter the Authentication Password.
e. Select the Encryption Protocol from the list.
NOTE: AES is the encryption protocol selected by default.
NOTE: If the Authentication Protocol is set to None, then the authentication and encryption options are disabled.
f. Click OK.
The congured SNMPv3 trap prole is displayed in the SNMP V3 Trap Conguration window.
4. Alternatively, to import the .csv le containing the credentials:
a. Click Export to generate a sample .csv le.
b. Save the le to your system, and populate the Agent IP Address, Engine ID, Username, Authentication Protocol,
Authentication Password, Encryption Protocol, and Encryption Password elds in the .csv le.
c. Click Import to import the .csv le.
The imported credentials are displayed in the SNMP V3 Trap Conguration window.
254