Users Guide

Deleting traps
The Custom Trap Denitions view also enables you to delete user-dened traps. Traps that are pre-dened in OpenManage
Essentials cannot be deleted.
Before you begin, ensure that you are logged in with OmeAdministrator privileges.
To delete traps:
1. Click Manage → Alerts → Manage Traps.
2. In Manage Traps, click Custom Trap Denitions.
3. In the User Dened Traps grid, select the traps you want to delete.
The selected traps are highlighted
4. Click Delete Trap.
The conrmation dialog box is displayed.
5. Click Yes.
Resetting built-in trap denitions
The Reset Built-in Trap Denitions view enables you to reset a pre-dened OpenManage Essentials trap that you edited earlier.
Before you begin, ensure that you are logged in with OmeAdministrator privileges.
To revert traps:
1. Click Manage → Alerts → Manage Traps.
2. In Manage Traps, click Reset Built-in Trap Denitions.
The Revert Trap view displays all the pre-dened trap denitions that you edited.
3. In the Edited Traps grid, select the traps you want to revert and click Revert Traps.
The conrmation dialog box is displayed.
4. Click Yes.
Conguring SNMPv3 traps
The latest version of OpenManage Essentials supports SNMPv3 traps. The SNMPv3 traps oer enhanced security than V1/V2c
notications. The Windows trap service is disabled when SNMPv3 traps is selected. For more information, see Alert Settings.
To congure SNMPv3 traps:
1. Select Manage → Alerts → Common Tasks → SNMP V3 Trap Conguration.
SNMP V3 Trap Conguration window is displayed.
NOTE: The SNMPv3 trap conguration details are automatically populated for the devices discovered using the
SNMPv3 protocol. To receive the SNMPv3 traps, enable SNMPv3 trap listener under Settings → Alert Settings.
2. Enter the details in the following columns for the devices discovered using SNMP V1/V2c or WSMAN protocols:
NOTE: The details in the SNMP V3 Trap Conguration window can be edited only if Support V1/V2c/V3 Traps is
selected under
Alert Settings → SNMP Listener Settings. If Support V1/V2c is selected, then you can view the
details only.
a. Username
b. Authentication Protocol
c. Authentication Password
d. Encryption Protocol
e. Encryption Password
3. To congure the SNMPv3 trap manually:
a. Click Add New.
SNMP V3 Trap Conguration window is displayed.
b. Enter the details in the following elds:
253