Users Guide

Field Description
NOTE: If you select both Deploy Template and Boot to
Network ISO in the Name and Deploy Options or Select
Deploy Options page, the Chassis Template option is
disabled.
Select ISO Location
The Select ISO Location page enables you to provide the details of the ISO le.
NOTE: The Select ISO Location page is only displayed if you select the Boot to Network ISO option on the Name and
Deploy Options or Select Deploy Options page.
The elds displayed in the Select ISO Location page are described in the following table.
Table 109. Select ISO Location
Field Description
ISO Filename
ISO Filename Provide the name of the ISO le.
Share Location
Share IP Provide the IP address of the network share where the ISO le
is available.
Share Name Provide the name of the network share where the ISO le is
available.
Share Credentials
Share Username Provide the user name required to access the network share.
Share Password Provide the password required to access the network share.
Related links
Deploy Template Wizard
Select Virtual Input-Output Pool
The Select Virtual I/O Pool page allows you to select the method of assigning the virtual I/O identity on the target servers.
The elds displayed on the Select Virtual I/O Pool page are described in the following table.
Table 110. Select Virtual I/O Pool
Field Description
User-dened I/O assignment Select to manually assign the virtual I/O identities.
Automatic I/O assignment Select to allow OpenManage Essentials to automatically assign
virtual I/O identities to the target servers. The virtual I/O
identities are assigned from the virtual I/O pool that you select.
NOTE: The virtual I/O pools are available for selection
only if you have already created the virtual I/O pools.
Related links
Create Compute Pool Wizard
189