Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerEMC OpenManage Essentials Version 2.4
111112113114115116117118119120
• Select a device in the device tree. The License Information table in the device inventory indicates the licenses installed on the
device.
Viewing unlicensed server targets
To view the server targets for conguration management that do not have the Server Conguration Management license installed:
1. Navigate to the Manage > Conguration > Device Conguration Compliance Portal.
2. In the Device Compliance pie-chart, click the Non-licensed segment. All the Non-licensed Devices window displays the
possible targets for server conguration management that do not have a license.
Related links
Deploying a device deployment template—Bare-metal deployment
Deploying a device conguration template—Stateless deployment
Setting up device conguration auto deployment—Bare-metal deployment
Setting up device conguration auto deployment—Stateless deployment
Conguring the credentials and device conguration inventory schedule
Device requirements for deployment and compliance tasks
The following are the device requirements for device conguration deployment and conguration compliance tasks:
• For servers:
– PowerEdge servers with the latest version of iDRAC7, 8, or 9 with the Lifecycle Controller rmware installed.
– Server Conguration Management license installed on the iDRAC. This license is not the same as the iDRAC license.
– iDRAC Enterprise or iDRAC Express license. This license is not the same as the Server Conguration Management license. If
the iDRAC Enterprise license is not installed on target servers, certain features of iDRAC are not available.
• For chassis:
– Supported rmware versions:
◦ PowerEdge M1000e with chassis rmware version of 6.0 and later installed.
◦ PowerEdge VRTX with chassis rmware version of 3.0 and later installed.
◦ PowerEdge FX2 or FX2s with chassis rmware version of 2.0 and later installed.
– PowerEdge FX2, FX2s, and VRTX chassis must have an Enterprise license.
• For IOAs:
– IOAs must be congured in one of the following operational modes:
◦ Standalone
◦ Virtual Link Trunk (VLT)
◦ Programmable MUX (PMUX)
NOTE: Compliance tasks are not supported for IOAs and IOA attributes in the chassis templates.
– The IO aggregator must have rmware version of 9.10.0.0, 9.10.0.1P10, 9.11.0.0, 9.11.2.0, 9.13.0.0, and 9.13.0.0P1 installed.
120