Dell EMC OpenManage Essentials Version 2.4 Support Matrix 1 June 2018 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
1 Introduction Dell EMC OpenManage Essentials is a hardware management application that provides a comprehensive view of Dell EMC systems, devices, and components in your environment. This document lists the agents, devices, operating systems, and databases supported by OpenManage Essentials version 2.4. NOTE: For the list of devices supported by Dell EMC SupportAssist Enterprise, see the Dell EMC SupportAssist Enterprise Support Matrix.
Table 1. Agents supported by OpenManage Essentials (continued) Dell systems agents Supported version NOTE: Make sure that Express or Enterprise licenses are available to perform firmware updates. iDRAC6 For monolithic systems — 1.98 and later For modular systems — 3.65 and later Dell Command Monitor (previously Dell OpenManage Client Instrumentation) 9.1 or later Dell Networking OS 9.10.0.0, 9.10.0.1P10, 9.11.0.0, 9.11.2.0, 9.13.0.0, 9.13.0.1, and 9.13.0.
Table 2. Supported PowerEdge servers (continued) yx0x systems yx1x systems yx2x systems yx3x systems yx4x systems PowerEdge M710 PowerEdge M710HD PowerEdge M910 * As OpenManage Essentials version 2.4 does not support the verification of SHA512-signed package files, the deployment of OpenManage Server Administrator fails on Linux OS nodes. Table 3.
Table 7.
Table 9. Supported devices (continued) Dell EMC CX3-10 Dell EMC CX4-120 Dell EMC CX4-120 Dell EMC CX3-20 Dell EMC CX4-240 Dell EMC CX4-2400 Dell EMC CX3-40 Dell EMC CX4-480 Dell EMC CX4-480 Dell EMC CX3-80 Dell EMC CX4-960 Dell EMC CX4-960 Dell EMC CX500 Dell EMC CX700 Supported Dell EMC Storage devices (previously Dell Compellent devices) Table 10.
Table 12.
Supported managed rack Power Distribution Units Table 15. Supported managed rack Power Distribution Units K538N G756N H544N J523N K539N Supported metered rack Power Distribution Units Table 16. Supported metered rack Power Distribution Units 1X98J XX5T6 C0G4D G740N G744N 7P35N RXKCH G728N H534N H537N 09FG8 K5YYY J519N J520N J521N 4J1C2 2CM2K K535N K536N 6809 Supported Keyboard, Video, and Mouse (KVM) Table 17.
Supported client systems Table 20.
Supported operating systems for managed systems Dell EMC systems and operating system versions that OpenManage Essentials can manage correspond to the Dell systems and operating systems supported by Dell OpenManage Software. For the Dell systems and operating system versions that OpenManage Essentials can manage, see the Dell systems and operating systems listed in the Dell Systems Management OpenManage Software Support Matrix. To access the support matrix, visit OpenManage Essential Support Matrix 2.4.
Table 21.
Known limitations for stateless deployment The following are the known limitations for deploying virtual I/O identities on target servers: ● On Broadcom network adapters, OpenManage Essentials does not support boot from ISO for installing the operating system on a SAN along with the virtual I/O identity deployment. However, if an operating system is already installed on the SAN, after deployment of virtual I/O identities, the server can boot from the SAN.
