Release Notes

Issue 2:
Description: For device configuration inventory tasks, the Task Execution History displays the user who ran the task as
System. [48738]
Issue 3:
Description: If a device on which a configuration template was deployed, is deleted and then rediscovered, the last template
deployed on the device is not displayed in the Repurpose and Bare Metal Devices tab.
Issue 4:
Description: Auto deployment tasks created in OpenManage Essentials version 2.0 do not run successfully after upgrade to
version 2.0.1 or version 2.2. [61955]
Resolution: Recreate the auto deployment task after the upgrade.
Issue 5:
Description: When CMC deployment fails on the target chassis (firmware M1000e 5.x, VRTX 2.x, FX2/FX2s 1.x) due to invalid
or unsupported values in the template attributes, the status is displayed as "Unknown" instead of "Failed" in the Task Execution
History window under Details tab. [75135]
Resolution: See the description in task details to determine the issue.
Issue 6:
Description: If the deployment template is captured from a server with configurations like DELL PERC S130/S140 with Single
Disk based volumes, then the deployment of those templates on the target devices fail with “RAID Level not supported” error.
[77419]
Resolution: The deployment of single disk-based volumes is not supported by iDRAC server configuration feature. After
deploying the template, manually configure the single disk-based volumes using PERC configuration utility.
Issue 7:
Description: When the create template task is modified, junk characters are displayed in the template name which has non-
English characters. [79180]
Resolution: Avoid using non-English characters in the template name. If the template name has non-English characters, then
edit the template name in the edit wizard to remove them.
Issue 8:
Description: Compliance report is not generated when a configuration baseline is associated with more than 500 devices and is
timed out after an interval of 30 minutes. [81748]
Resolution: As a workaround, associate the baseline with 500 devices at a time. For generating compliance report for more than
500 devices, clone the existing baseline and separately associate the other set of 500 devices.
Security
To prevent security issues due to cross frame scripting (XFS) in Internet Explorer, you must disable web frames across different
domains:
1. Click Tools > Internet Options.
2. Click Security.
3. Under Select a zone to view or change security settings, select Local intranet.
4. Under Security level for this zone, click Custom level.
5. Under Miscellaneous > Navigate windows and frames across domains, select either Prompt or Disable.
Reports
Issue 1:
Description: In the Agent and Alert Summary report, if the devices are filtered by any Group other than All Devices, the Agent
Summary table does not display the correct information. [49510]
Resolution:
Issue 2:
Description: Device Name is a default field and is present in all reports. [134260]
19