Users Guide
– NAS Clusters
• Hyper-Converged Infrastructure
– VxRail
– XC Series
• KVM
• Microsoft Virtualization Servers
– Virtual machines
• Modular systems
– PowerEdge Chassis
– PowerEdge FX2
– PowerEdge M1000e
– PowerEdge VRTX
• Network Devices
– Networking Switches
– Fibre Channel Switches
– Network Appliances
• OEM Devices
• OOB Unclassied Devices
– IPMI Unclassied Devices
• Power Devices
– PDU
– UPS
• PowerEdge C Servers
• Printers
• RAC
NOTE: If a DRAC or iDRAC is discovered, it is displayed under the RAC group and not under the Servers group. If
both DRAC/iDRAC and corresponding server are discovered, they are correlated into a single device. The device is
displayed in both the RAC and Servers group.
NOTE: If the RAC on a PowerEdge C server is discovered using IPMI, it is displayed under OOB Unclassied devices.
• Repurpose and Bare Metal
NOTE: Devices in the Repurpose and Bare Metal group are displayed as targets for device conguration deployment.
You must explicitly add devices to this group for deploying a device conguration. On bare metal deployments, you
can remove the devices from the Repurpose and Bare Metal group after the deployment is complete. For more
information, see Server Deployment and Re-provisioning.
• Servers
• Storage Devices
– Dell Compellent Arrays
– Dell EqualLogic Groups
– Dell NAS Appliances
– Dell EMC Arrays
– PowerVault MD Arrays
– Tape Devices
• Unknown
• VMware ESX servers
– Virtual machines
85