Users Guide
Field Description
NOTE: The RAC name is displayed only if you have
discovered the iDRAC with the WS-Man protocol.
Otherwise, the system name is displayed instead of the
RAC name.
Identify devices with lost connection in device tree
Select the check box to display the icon in the device tree
and portals for devices that are not reachable.
Discovery Settings
The Discovery Settings page enables you to congure the type of wizard you want to use for discovering devices. The elds
displayed in the Discovery Settings page are described in the following table.
Table 257. Discovery Settings
Field Description
Standard Wizard If selected, the Discover Devices wizard displays a list of
protocols for discovering devices.
Guided Wizard If selected, the Discover Devices wizard displays a list of device
types and the required protocols for discovering and managing
the selected devices. After the required protocol congurations
are completed, by default, this wizard runs both discovery and
inventory.
NOTE: Discovery of Dell EMC storage arrays is not
supported by the Guided Wizard.
Skip ICMP ping during discovery If selected, the ICMP Conguration settings will be disabled
from the Discover Devices wizard. By selecting this option,
ICMP ping is skipped during discovery and inventory of the
devices, system updates, conguration and deployment tasks.
Discover the selected Device Types only In OpenManage Essentials 2.3, this option is enabled by default.
If selected, this option allows device-type discovery in the
guided wizard.
NOTE: The device range that was discovered in the
earlier version of OME may have discovered both
chassis and iDRAC using WS-MAN protocol. In
OpenManage Essentials 2.3, if Discover the selected
Device Types only option is enabled in Discovery
settings, then only the specic device selected in the
guided wizard will be discovered and other devices are
classied as unknown devices. For example: Selecting
iDRAC device type with WS-MAN protocol will discover
only iDRAC devices using WS-MAN protocol.
351