Users Guide

Table 236. Server Power Options
Field Description
General
Task Name Provide a name for this server power options task.
Select the type Select from the following options:
• Reboot — Restarts the system without powering o.
• Power Cycle — Powers o and then restarts the system.
NOTE: Make sure that the shutdown option is
congured for the operating system before you
perform a graceful shutdown using this option. If you
use this option without conguring it on the
operating system, it restarts the managed system
instead of performing a shutdown operation.
• Power O — Powers o the system.
• Power On — Powers on the system. This option works only
on target systems that contain RAC.
Shutdown OS rst Select to shut down the operating system before executing the
server power options task.
Task Target
Select a query Select a query from the drop-down list. To create a new query,
click New.
Select the device(s) for this task to target Select the devices to which you want to assign this task.
Enable All Select to override the device capability and allow all the available
devices for selection as task targets.
Schedule and Credentials
Set schedule Select from these options:
• Activate Schedule — Select this option to activate a
schedule for the task.
• Run now — Select this option to run the task immediately.
• Set schedule — Select this option to set a date and time
for the task to run.
• Run Once — Select this option tot run the task on the
planned schedule only once.
• Periodic — Select this option to run the task frequently at
specied intervals:
– Hourly — Select this option to run the task once every
hour.
– Daily — To run the task once every day.
– Weekly — To run the task once every week.
– Monthly — To run the task once every month.
Range of Recurrence:
• Start — To specify the date and time at which the task
should begin.
• No End Date — To continuously run this task based on the
selected frequency. For example, if you selected Hourly, then
this task continuously runs every hour from the start time.
• End By — To stop the task at the specied date and time.
Enter User Name and Password
User Name — Provide in the format domain\user name or local
host\user name.
309