Users Guide

Alert Details
Table 187. Alert Details
Field Description
Severity The alert severity.
Acknowledged Whether the alert has been acknowledged or not by the user.
Recommended Resolution Click to view the recommended resolution for the issue that
resulted in the alert.
NOTE: The recommended resolution is available only for
alerts received from either OMSA installed on the server
or the iDRAC of the server. Alerts received from OMSA
include the recommended resolution only if the
Enhanced Message Format option is enabled in OMSA.
Device The device which generated the alert.
Time The date and time the alert was generated.
Category The categorization of the alert.
Source The name of the alert source denition.
Description The message contained in the alert.
SNMP Enterprise OID Provides the enterprise OID (SNMP OID prex) of the
management information base (MIB) le that denes the event
source that you want to monitor.
SNMP Generic Trap OID Provides the generic trap ID of the SNMP trap that you want to
monitor from the desired event source. See the Dell
OpenManage Server Administrator SNMP Reference Guide at
dell.com/OpenManageManuals for more information on SNMP
traps.
SNMP Specic Trap OID Provides the specic trap ID of the SNMP trap that you want to
monitor from the desired event source. See the Dell
OpenManage Server Administrator SNMP Reference Guide at
dell.com/OpenManageManuals for more information on SNMP
traps.
Alert Log Settings
Congure settings which control the size, messaging, and purge settings of the Alert Logs.
Table 188. Alert Log Settings
Field Description
Maximum size of Alert Logs Determines the maximum number of alerts the alert logs can
have before purging occurs.
Log a warning when the Alert Log size reaches A warning alert is sent to the application log when this size is
reached.
When the Alert Logs reach the Maximum size, purge Purges the specied number of alerts when the maximum size is
reached.
257