Users Guide

Table 73. FCoE Port Name Identities
Field Description
Include Fibre Channel WWPN Identities in the pool Select to include WWPN identities in the virtual I/O pool.
Specify the start address Select to specify the start address for the WWPN identities that
will be generated.
Number of Identities Set the number of identities that you want to predene in the
WWPN identities that will be generated.
Import from le Select to import WWPN identities from a .csv le.
Import Click to open the wizard used to import WWPN identities from
a .csv le.
NOTE: The .csv must include only one address or
identity per line.
View Click to view the WWPN identities in the virtual I/O pool.
NOTE: You can only view WWPN identities that you
have already imported from a .csv le.
Related link
Create Virtual Input-Output Pool Wizard
iSCSI IQN Identities
The iSCSI IQN Identities page allows you to generate or import iSCSI Qualied Name (IQN) identities to the virtual I/O pool. The
IQN identities are required to support boot-from-SAN using the iSCSI protocol.
The elds displayed on the iSCSI IQN Identities page of the Create Virtual I/O Pool Wizard are described in the following table.
Table 74. iSCSI IQN Identities
Field Description
Include IQN Identities in the Pool Select to include IQN identities in the virtual I/O pool.
Specify a prex to allocate from Select to specify a prex for the IQN identities that will be
generated.
NOTE: The typical iSCSI IQN format is:
iqn.date.domainname-in-reverse:storage-identier . For
example, iqn.
2001-04.com.example:storage.disk2.sys1.xyz.
Import from le Select to import IQN identities from a .csv le.
Import Click to open the wizard used to import IQN identities from
a .csv le.
NOTE: The .csv must include only one address or
identity per line.
View Click to view the IQN identities in the virtual I/O pool.
NOTE: You can only view IQN identities that you have
already imported from a .csv le.
Related link
Create Virtual Input-Output Pool Wizard
168