Users Guide

Adding a Discovery Range for Auto Deployment
You can create a discovery range for the auto deployment task through either the Auto Deployment tab or the Discovery and
Inventory
portal.
Before you can add a discovery range through the Auto Deployment tab, you must setup an auto deployment task.
To add a discovery range through the Auto Deployment tab:
1. Click Deployment → Deployment Portal.
The Repurpose and Bare Metal Devices tab is displayed in the right pane.
2. In the right pane, click the Auto Deployment tab, and then click Add Discovery Range.
The Discover Devices wizard is displayed.
3. Follow the instructions from step 2 to step 5 in Creating a Discovery and Inventory Task to create the discovery range.
The discovery range is created in the Discovery and Inventory portal.
Related link
Auto Deploying Device Congurations
Auto Deployment
Removing Devices From an Auto Deployment Task
If you do not want to perform auto deployment on a particular devices, you can remove those devices from the auto deployment
task.
To remove devices from an auto deployment task:
1. Click Deployment → Deployment Portal.
The Repurpose and Bare Metal Devices tab is displayed in the right pane.
2. On the right pane, click the Auto Deployment tab, and select the devices you want to remove.
3. Perform one of the following:
• Click Remove Selected Devices.
• Right-click and select Delete.
4. On the conrmation dialog box, click Yes.
The devices are removed from the Auto Deployment tab.
Related link
Auto Deployment
Importing Device Specic Attributes
You can also import the device specic attributes for deployment, if you already have a .csv le that includes the attributes.
Before you begin, make sure that the .csv le that you want to import meets the requirements specied in Import File Requirements.
To import the attributes:
1. On the Edit Attributes page of the Deployment Template Wizard or Setup Auto Deployment wizard, click Import/Export.
The Import/Export Device Specic Attributes window is displayed.
2. Click Import.
The import conrmation dialog box is displayed.
3. Click Yes.
4. Navigate and select the .csv le, and click Open.
The Import Summary dialog box displays the number of imported attributes.
5. Click OK.
6. In the Import/Export Device Specic Attributes window, click Close.
139