Users Guide

NOTE: If Static IPv4 Address is used in the deployment of a chassis template, then all the components in the

chassis are rediscovered after the deployment task is completed.

NOTE: If Static IPv4 Address is provided and the DHCP attribute is enabled, then the DHCP settings take

precedence over the provided Static IPv4 address. Similarly, If Static IPv4 Address is provided and the DHCP

attribute is disabled, then the Static IPv4 Address is used for the template deployment.

i. If you do not want to deploy a particular attribute in the template and want to retain the current attribute value on the

target device, clear the check box in the Deploy column.

j. Edit or select the values in the Value column based on your preference.

k. Click Save.

l. (For IOA VLAN conguration deployment only) Click the IOA VLAN Attributes tab to edit the IOA VLAN attributes for the

selected template.

m. Select the Deploy check box for the attributes that you want to deploy.

n. Type the values for the tagged VLANs and untagged VLAN.

o. Click Save.

p. Click Next.

8. On the Set Schedule page:

a. Select either Run now, or click the calendar icon and select the date and time you want to run the task.

b. Under Execution Credentials:

• For server conguration deployment — type the credentials that have Administrator privileges on the iDRAC of the

target servers.

• For chassis conguration deployment — type the credentials that have Administrator privileges on the CMC of the

target chassis.

c. (Only for IOA VLAN conguration deployment) Under IOA Credentials, type the credentials that have Administrator

privileges on the IOA.

d. Click Next.

9. On the Preview page:

a. Optional: Click Preview to verify if the attributes of the device conguration template will be deployed successfully on the

target devices.

b. Click Next.

10. On the Summary page, review the information that you have provided, and then click Finish.

The Deploy Template warning is displayed.

11. If you want to continue the deployment, click Yes.

The Deploy Template task is created and run based on the schedule you have selected. You can double-click the task in Task

Execution History to view the task execution details.