Support Matrix

Introduction
Dell EMC OpenManage Essentials is a hardware management application that provides a comprehensive view of the Dell systems,
devices, and components in your environment. This document lists the agents, devices, operating systems, and databases supported
by OpenManage Essentials version 2.3.
NOTE: For the list of devices supported by Dell EMC SupportAssist Enterprise, see the Dell EMC SupportAssist
Enterprise Support Matrix at dell.com/serviceabilitytools.
Supported agents
NOTE: For more information on the devices listed in this document, see the documentation for that device.
Table 1. Agents supported by OpenManage Essentials
Dell systems agents Supported version
Dell EMC OpenManage Server Administrator
For 14th generation of PowerEdge servers — 9.0.1
For 11th, 12th and 13th generation of PowerEdge servers — 8.4
or later
Dell EMC Lifecycle Controller
For 14th generation of PowerEdge servers — 3.00.00.00
For 12th and 13th generation of PowerEdge servers —
2.30.30.30 or later
For 11th generation of PowerEdge servers — 1.6.x or later
Chassis Management Controller (CMC)
For PowerEdge M1000e — 5.1 or later
For PowerEdge VRTX — 2.1 or later
For PowerEdge FX2 and FX2s — 1.3 or later
iDRAC9 3.00.00.00
iDRAC7 and iDRAC8 2.30.30.30 or later
NOTE: Make sure that Express or Enterprise licenses are
available to perform rmware updates.
iDRAC6
For monolithic systems — 1.98 or later
For modular systems — 3.65 or later
Dell Command Monitor (previously Dell OpenManage Client
Instrumentation)
9.1 or later
Dell Networking OS
9.10.0.0, 9.10.0.1P10, 9.11.0.0 and 9.11.2.0
Supported devices
Supported Dell EMC PowerEdge servers
NOTE: In the PowerEdge server name format yxxx; y denotes alphabets, for example M,R, or T, and x denotes numbers.
Table 2. Supported PowerEdge servers
yx0x systems yx1x systems yx2x systems yx3x systems yx4x systems
PowerEdge M600 PowerEdge R210 PowerEdge M420 PowerEdge M630 PowerEdge M640
PowerEdge M605 PowerEdge R210 II PowerEdge M520 PowerEdge M830 PowerEdge R440
3