Release Notes

Issue 3:

Description: For Dell EMC PowerVault MD storage arrays, OpenManage Essentials displays critical health status, even if the device

is in a warning state. [42607]

Issue 4:

Description: The model number for both Dell EMC Force10/Networking C150 and C7004 Ethernet switches is displayed as C150/

C7004 switch in the device inventory. The model number for both Dell EMC Force10/Networking C300 and C7008 Ethernet

switches is displayed as C300/C7008 switch in the device inventory. [43443]

Issue 5:

Description: OEM devices discovered using the SNMP or WS-Man protocol are classied under Modular Systems in the device

tree. [40572]

Issue 6:

Description: When a PowerEdge FX2s chassis is discovered using WS-Man protocol, the hostname of the corresponding mapped

sled is not displayed in the PCIe Slot Information table in the device inventory. [37351]

Issue 7:

Description: When a PowerEdge FM120x4 sled is discovered in-band using SSH protocol, the Embedded Device Information table

is not displayed in the device inventory. [39312]

Issue 8:

Description: When a PowerEdge FM120x4 sled is discovered using SNMP+WMI protocol, the Software Inventory Table displays

multiple entries for the iDRAC version. [39428]

Issue 9:

Description: If a device is not congured with the system contact details, the Contact Information table is not displayed in the

device inventory information. [36733]

Issue 10:

Description: If the PowerEdge RAID Controllers (PERC) in a PowerEdge VRTX chassis have dierent versions of rmware installed,

the Software Inventory Information table displays only the PERC with the main controller rmware version. [39761]

Resolution: Make sure you update the rmware version of the PERC manually in the Chassis Management Controller console.

Issue 11:

Description: Dell EMC EqualLogic FS7500 NAS device discovered using the management member IP is displayed as Unknown in the

device tree. [39618]

Resolution: Discover the Dell EMC EqualLogic FS7500 NAS device using the group manager IP.

Issue 12:

Description: If a PowerEdge VRTX chassis is discovered using SNMP protocol and NetBIOS name resolution setting, the

instrumentation (NetBIOS) name is not resolved. [27327]

Issue 13:

Description: When a monolithic Dell EMC 11th or 12th Generation PowerEdge server with iDRAC6/7 is discovered using the IPMI

protocol only (iDRAC out-of-band discovery), the overall health status of the server is not reported correctly in OpenManage

Essentials. This issue occurs due to a known limitation in iDRAC. [21599]

Resolution: Discover the server's iDRAC (out-of-band) using either WS-Man or SNMP protocol.

Issue 14:

Description: When only the EqualLogic storage array in a PowerEdge chassis is discovered, the EqualLogic storage array is not

classied under Modular Systems → PowerEdge chassis → Storage in the device tree. [38654]

Resolution: Make sure that the PowerEdge chassis is also discovered.

Issue 15:

Description: Dell EMC Fibre Channel switches (modular) are classied under Network Devices → Switches and not under Modular

Systems in the device tree. [36990]

Issue 16: