Release Notes
Issue 49:
Description: The Task Target page does not display all device groups for the OMESiteAdministrator. [61821]
Issue 50:
Description: A cloned task may not display all the task targets immediately after the task is cloned. [55462]
Resolution: Wait until the cloned task is displayed in both the Remote Tasks tree and the Remote Tasks grid, and then verify the
task targets.
Conguration Management
Issue 1:
Description: The device conguration Inventory and Compliance tabs in the Devices Portal display inventory and compliance
information only after the corresponding tab is manually refreshed. [48567]
Issue 2:
Description: For device conguration inventory tasks, the Task Execution History displays the user who ran the task as System.
[48738]
Issue 3:
Description: If a device on which a conguration template was deployed, is deleted and then rediscovered, the last template
deployed on the device is not displayed in the Repurpose and Bare Metal Devices tab.
Issue 4:
Description: Auto deployment tasks created in OpenManage Essentials version 2.0 do not run successfully after upgrade to version
2.0.1 or version 2.2. [61955]
Resolution: Recreate the auto deployment task after the upgrade.
Issue 5:
Description: When CMC deployment fails on the target chassis (rmwares M1000e 5.x, VRTX 2.x, FX2/FX2s 1.x) due to invalid or
unsupported values in the template attributes, the status will be displayed as "Unknown" instead of "Failed" in the Task Execution
History window under Details tab. [75135]
Resolution: See the description in task details to determine the issue.
Issue 6:
Description: If the deployment template is captured from a server with congurations like DELL PERC S130/S140 with Single Disk
based volumes, then the deployment of those templates on the target devices will fail with “RAID Level not supported” error. [77419]
Resolution: The deployment of single disk based volumes is not supported by iDRAC server conguration feature. After deploying
the template, manually congure the single disk based volumes using PERC conguration utility.
Issue 7:
Description: The server does not boot from SAN after the successful deployment of FC attributes on Emulex cards. [78197]
Resolution: Change the FC attributes under System Setup → Device Settings.
Issue 8:
Description: When the create template task is modied, junk characters are displayed in the template name which has non-English
characters. [79180]
Resolution: Avoid using non-English characters in the template name. If the template name has non-English characters, then edit
the template name in the edit wizard to remove them.
Issue 9:
Description: The remediation task displays unhandled exception error message when the duplicate task name is entered. [79449]
Resolution: Relaunch the OpenManage Essentials UI and create a new remediation task with a unique name.
Issue 10:
Description: The user name is not populated in the SNMPv3 Trap Conguration page when both Ws-Man and SNMPv3 protocols
are used during the discovery of devices. [79450]
Resolution: Enter the user name in SNMPv3 conguration page.
19