White Papers

35 Benchmark the Performance, Reliability, and Scalability of Dell EMC OpenManage Enterprise 3.2 in your data
center environment
Internal Use - Confidential
7.3.3 Unable to update firmware on target device by using Dell EMC OpenManage
Enterprise because Lifecycle Controller is in use
7.3.3.1 Issue
Unable to update Dell EMC OpenManage Enterprise firmware because of an issue in Lifecycle Controller.
Firmware on target device cannot be updated by using Dell EMC OpenManage Enterprise because of an
issue in Lifecycle Controller
7.3.3.2 Resolution
1. Start the virtual console of the target appliance.
a. Check if the target server is requesting for an input from you.
b. Else, reboot the system and wait until the target IP is booted to the operating system.
c. If the tasks in 1‒3 does not resolve the issue, reset the iDRAC.
d. Update the firmware after the iDRAC reset operation is completed.
7.3.4 Unable to update firmware on target device by using Dell EMC OpenManage
Enterprise because either an incorrect file is used or file signature is incorrect
7.3.4.1 Issue
Unable to update Dell EMC OpenManage Enterprise firmware because either an incorrect file is used or file
signature is incorrect.