Users Guide

4. 在选择虚拟机页面上，选择虚拟机以导入（只有一个选项可用），然后单击下一步。
5. 在选择导入类型页面上，选择复制虚拟机，然后单击下一步。
6. 在选择位置页面上，保留默认值，或选择虚拟机、快照和智能分面的位置。
7. 单击下一步。
8. 在选择存储文件夹页面上，保留默认值或单击浏览，然后选择虚拟驱动器的位置，然后单击下一步。
9. 在摘要页面上查看您在早期页面上选择的选项，然后单击完成以在 Hyper-V 主机上部署 OpenManage Enterprise–Tech Release 虚
拟设备。
10. 部署 OpenManage Enterprise–Tech Release 虚拟设备后，选择 OpenManage Enterprise–Tech Release 虚拟设备，然后单击操作下
的开始。
注: 也可以通过使用兼容的 KVM 环境来部署 OpenManage Enterprise–Tech Release 设备文件。
Deploying the Hyper-V appliance on Microsoft
Server 2012
1. Extract the openmanage_enterprise_vhd_format.zip file, and then move or copy the enclosed VHD file into the appropriate
location on your system where you want to store the OpenManage Enterprise (OME) virtual drive.
2. Start Hyper-V Manager.
3. 3. Click Action > New > Virtual Machine.
4. On the Specify Name and Location page, select the VM name and a storage location appropriately for your environment.
5. Navigate to the Specify Generation page and select Generation 1. OpenManage Enterprise-Tech Release does not support
Generation 2.
NOTE:
Ensure that 8192 MB is assigned as the memory. Dynamic memory can be turned on, but for best
performance, it is recommended to leave the option 'disabled'.
6. On the Networking Configuration page, ensure that the network adapter is connected to the network. If set to 'Not Connected',
OME-Tech Release will not function properly during the first reboot, and requires redeployment if this situation recurs.
7. On the Connect Virtual Hard Disk page, select Use an existing virtual disk drive, and then go to the VHD file you copied in step 1
earlier.
8. Complete the on-screen instructions.
9. Open the settings of the newly created VM.
10
部署和管理 OpenManage Enterprise–Tech Release