Users Guide

Table Of Contents
Under Server Options select one of the following reboot options :
a. To reboot the server immediately after the firmware/driver update, choose Reboot server immediately and from the dropdown
menu select one of the following options:
i. Graceful Reboot without Forced Shutdown
ii. Graceful Reboot with Forced Shutdown
iii. PowerCycle for a hard reset of the device.
b. Select Stage for next server reboot to trigger the firmware/driver update when the next server reboot happens.
NOTE: If the firmware/driver update jobs are created with the 'Stage for next server reboot' option, then the inventory
and baseline check must be executed manually after the package is installed in the remote device.
Clear Job Queue: Select to delete all jobs (scheduled, completed, and failed) on the target device, before the update job is initiated.
NOTE: This function is not supported for updating the drivers.
Reset iDRAC: Select to initiate a reboot of the iDRAC before the update job is initiated.
NOTE: This function is not supported for updating the drivers.
5. Click Update.
A firmware/driver update job is created to update the device's firmware and/or driver. You can view the status of the job on the Monitor
> Jobs page.
62 デバイスのファームウェアおよびドライバーの管理