Users Guide

View definitions of identity pools
To view the definitions of an identity pool:
1. On the Configuration page, click Identity Pools.
2. Select an identity pool, and then click Summary.
The various identity definitions of the identity pool are listed.
3. To view the usage of these identity definitions, click the Usage tab and select the View By filter option.
Edit identity pools
You can edit an identity pool to add ranges that you had not specified earlier, add an identity type, or delete identity type ranges.
To edit the definitions of an identity pool:
1. On the Configuration page, click Identity Pools.
2. Select the identity pool, and then click Edit.
The Edit Identity Pool dialog box is displayed.
3. Make the changes to the definitions in the appropriate sections, and then click Finish.
The identity pool is now modified.
Delete identity pools
You cannot delete an identity pool if the identities are reserved or assigned to a deployment template.
To delete an identity pool:
1. On the Configuration page, click Identity Pools.
2. Select the identity pool, and then click Delete.
3. Click Yes.
The identity pool is deleted and the reserved identities associated with one or more deployment templates are removed.
Define networks
1. Select Configuration > VLANs > Define.
2. In the Define Network dialog box, enter a name and an appropriate description.
3. Enter the VLAN ID, and then select the network type.
You can select a network type only for MX7000 chassis. For more information about the network types, see Network types
on page 73.
4. Click Finish.
The network currently configured in your environment is now defined and resources can access the network.
Network types
NOTE: You can select a network type for MX7000 chassis only.
Table 14. Network types
Network types Description
General Purpose (Bronze) Used for low priority data traffic.
General Purpose (Silver) Used for standard or default priority data traffic
General Purpose (Gold) Used for high priority data traffic
Manage device deployment templates 73