Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerEMC OpenManage Enterprise
151152153154155156157158159160
Table Of Contents
Other references and field descriptions
Definitions about some of the commonly displayed fields on the OpenManage Enterprise Graphical User Interface (GUI) are
listed and defined in this chapter. Also, other information that is useful for further reference is described here.
Topics:
• Schedule Reference
• Firmware baseline field definitions
• Schedule job field definitions
• Alert categories after EEMI relocation
• Token substitution in remote scripts and alert policy
• Field service debug workflow
• Unblock the FSD capability
• Install or grant a signed FSD DAT.ini file
• Invoke FSD
• Disable FSD
• Catalog Management field definitions
• Firmware/driver compliance baseline reports— devices with 'Unknown' compliance status
• Generic naming convention for Dell EMC PowerEdge servers
Schedule Reference
● Update Now: The firmware version is updated and matched to the version available in the associated catalog. To make the
update become effective during the next device restart, select the Stage for next server reboot check box.
● Schedule Later: Select to specify a date and time when the firmware version must be updated.
Firmware baseline field definitions
● COMPLIANCE: The health status of the firmware baseline. Even if one device associated with a firmware baseline is in
critical health status, the baseline health itself is declared as critical. This is called the rollup health status, which is equal to
the status of the baseline that has high severity. For more information about Rollup Health status, see the MANAGING THE
ROLLUP HEALTH STATUS BY USING IDRAC ON THE DELL EMC 14TH GENERATION AND LATER POWEREDGE SERVERS
white paper on the Dell TechCenter.
●
NAME: The firmware baseline name. Click to view the baseline compliance report on the Compliance Report page. For
more information about creating a firmware baseline, see Create a baseline on page 55.
● CATALOG: The firmware catalog to which the firmware baseline belongs to. See Manage firmware and driver Catalogs on
page 52.
● LAST RUN TIME: The time when the baseline compliance report is last run. See Check the compliance of a device firmware
and driver on page 56.
Schedule job field definitions
● Run now to start the job immediately.
● Run Later to specify a later date and time.
● Run On Schedule to run repeatedly based on a selected frequency. Select Daily, and then select the frequency
appropriately.
21
Other references and field descriptions 157