Release Notes

What is supported

For a complete list of supported devices, operating systems, and web browsers, see the Dell EMC OpenManage Enterprise–Tech Release

Support Matrix at delltechcenter.com/ome or dell.com/OpenManageManuals.

Limitations

• The hardware log data pertaining to the 12G and 13G servers monitored by OpenManage Enterprise-Tech Release are not displayed.

However, 14G hardware log data are displayed. [83414]

• The Rollup health status of Power Supply Unit (PSU) and fans is not shown for the FM120 sleds monitored by OpenManage

Enterprise-Tech Release. [67035]

• Users with Device Manager (DM) privileges cannot be assigned groups.

• The SNMP V1 and V2 alerts are not received by a device when V3 is enabled by leaving the passphrase blank or by setting the

passphrase less than eight characters. [85852]

• To receive SNMP V3 traps, authentication passphrase must be at least eight characters. [84929]

• The health status of any non-Dell EMC server that is discovered by using the IPMI protocol is indicated as 'unknown' in OpenManage

Enterprise-Tech Release, but it is indicated correctly in OpenManage Essentials. [85160]

• OpenManage Enterprise-Tech Release incorrectly allows the maximum and minimum bandwidth to be edited for a NIC port when the

partition is enabled. [84029]

• Devices whose MAC address is the same is getting correlated. [86543]

• The 'Stage for new reboot' feature is not supported on a chassis. [86173]

OpenManage Enterprise–Tech Release Online Help

Errata

• The online help uses OME as an acronym to refer to OpenManage Enterprise–Tech Release.

• The OpenManage Enterprise–Tech Release user roles types section lists that the users with Device Manager (DM) privileges manage

groups assigned by the administrator. However, a DM cannot be assigned any groups.

• The Managing OME users section lists that the User Permission per groups built-in report can be generated. However, this report

cannot be generated in this Tech Release version.

• In the job scheduling field definitions, a note is added about the cron format.

Known issues

Install or upgrade

Issue 1

Description: A possible delay in Email reception and Audit logging tasks while upgrading OpenManage Enterprise–Tech Release. These

tasks run 15 minutes after the Console Update is triggered. [76948]

Issue 2

Description: In OpenManage Enterprise–Tech Release, an audit log is not created after the OpenManage Enterprise–Tech Release

update process is successful or unsuccessful. [76948]

Discovery and inventory

Issue 1

Description: Discovery of PowerEdge FMXXX series servers by using Redfish protocol is not supported in OpenManage Enterprise–Tech

Release because node IDs are not available by using Redfish protocol. [81293]

Resolution: To discover, monitor, and update the PowerEdge FMXXX series servers, use WS-Man protocol.

Issue 2

Description: Discovery of S50N and S5000 switches with firmware versions 8.4.26 and 9.11 respectively may fail. [74209]

Dell EMC OpenManage Enterprise–Tech Release Release Notes